|
General
Perfect for marine or
any rough environment! This Tester can handle the toughest field
conditions. It meets MIL-STD-810F standards for drops, vibration and
temperature extremes, and it has an IP67 rating—meaning it's
impervious to dust and water immersion.
Specificaltions:
|
PHYSICAL |
|
|
Size |
19.0 cm (7.50”) x 9.5 cm (3.75”) x
4.5 cm (1.75”) |
|
Weight |
520 g (18 ounces) |
|
|
|
|
ENVIRONMENT |
|
|
Operating temperature |
-10° to 60° C (14° to 140° F) |
|
Storage temperature |
-40° to 70° C (-40° to 158° F) |
|
Temperature shock |
MIL-STD-810F, Method 503.4 |
|
Humidity |
MIL-STD-810F, Method 507.4 |
|
Water |
IP67, sealed against accidental
immersion
(1 m for 30 min.) MIL-STD-810F, Method 512.4,
Procedure I |
|
Drop |
MIL-STD-810F, Method 516.5,
Procedure IV
26 drops from 1.22 m (4 ft) onto plywood
over concrete, 6 additional drops at -30° C (-22° F), 6
additional drops at 60° C (140° F)
Sand and dust: IP67, MIL-STD-810F, Method 510.4, Procedure I |
|
Vibration |
MIL-STD-810F, Method 514.5,
Procedure
I (Fig. 17) & II |
|
Altitude |
MIL-STD-810F, Method 500.4,
Procedures I,
II & III 15,000 ft at 23° C (73° F) |
|
|
|
|
ELECTRICAL
|
|
|
Processor |
Intel PXA255 XScale CPU
200 MHz |
|
Memory |
64 MB high-speed SDRAM
(~22 MB reserved) |
|
Storage |
Onboard nonvolatile NAND Flash
128 MB (~31 MB reserved) |
|
Display |
240x320 pixel (1/4 VGA) color TFT
with LED
front light |
|
Batteries |
3800 mAh NiMH rechargeable pack |
|
I/O Ports |
406 MHz direct input 50Ω, 9-pin
serial port—RS232 (115 Kbps), USB client, DC power port
|
|
|
|
|
NOTE: The BT100S and the BT100AVS
must have the watertight cap removed iin order to make 406 MHz
stability measurements. |
What’s in the Rugged Beacon Tester Box
BeaconTester
RF Input Interface Cable
10 MHz REF Interface Cable
Operator’s Manual
Watertight Storage Box
Rugged PDA including:
PDA User Manuals
AC Adapter
Activesync Cable
PDA Software CD
Brochure
Ultra Rugged Brochure |
